Trouble setting up mogileFS
brad at danga.com
Sun Jan 29 09:45:15 UTC 2006
You have some port numbers wrong somewhere... the tracker doesn't speak
On Sat, 28 Jan 2006, Arnoud Vermeer wrote:
> Hi guys,
> I'm trying to setup a small test cluster of MogileFS, but I'm running into a
> I've got 3 desktop PC's in the datacenter running Debian Sarge (installed
> via netinstall)
> 2 x 1200 Mhz intel with a single PATA 40 gb HD
> and a AMD 2400+ also with a PATA 40 gb HD.
> I've installed mogileFS just fine, first the .tar.gz release from the site,
> but that one was running into problems with adding disks.
> So I grabbed the latest CVS (28-jan-2006), but this one seems to run into
> the same problems.
> mfs1 (1200Mhz+40GB HD) runs Perlbal, mogilefsd and mogstored
> mfs2 (2400Mhz+40GB HD) runs Perlbal, mogilefsd and mogstored
> mfs3 (1200Mhz+40GB HD) just runs mogstored
> I've added the hosts and disks via the mogadm commandline, but when I run a:
> mogadm -c /etc/mogilefs/mogadm.conf check
> I get the following result:
> mogadm -c /etc/mogilefs/mogadm.conf check (IP's and domain removed..)
> Checking trackers...
> 184.108.40.206:7001 ... OK
> 220.127.116.11:7001 ... OK
> Checking hosts...
> [ 1] mfs1.domain ... OK
> [ 2] mfs2.domain ... OK
> [ 3] mfs3.domain ... OK
> Checking devices...
> host device size(G) used(G) free(G) use%
> ---- --------------- ---------- ---------- ---------- ------
> [ 1] dev4 REQUEST FAILURE
> [ 2] dev3 REQUEST FAILURE
> [ 3] dev5 REQUEST FAILURE
> Illegal division by zero at /usr/bin/mogadm line 165,
> <Sock_18.104.22.168:7001> line 2.
> So I looked into the source and found the command at line 165, and gave this
> via telnet onto the the tracker:
> telnet localhost 7001
> Trying 127.0.0.1...
> Connected to localhost.localdomain.
> Escape character is '^]'.
> GET http://22.214.171.124:7500/dev4/usage
> ERR unknown_command Unknown+server+command
> So now I'm stumped.
> Does anybody have a clue?
> Arnoud Vermeer
> FreshWay Innovations
More information about the mogilefs